Make the seitan following the instructions below:
- There are loads of recipes for seitan and I am working my way through them, learning as I go. For this recipe I tried one by Isa Chandra (Chicken Stylee Seitan, available on thePPK.com) and because it was a big batch I tried a couple of different ways of cooking it. I think either way would work and I would definitely try the boiled method for this recipe next time.
- I followed the recipe by Isa Chandra up to the point of cooking. At that point, I separated the seitan dough in to two batches. With one, I followed the recipe, gentry cooking the seitan in stock. This was the most successful of my attempts so far. It is really, really important not to let it boil. I got all tech about it and dragged out the jam thermometer. I kept it between 94 and 98 degrees.
- Anyway, for this particular version, I took the other half of the seitan and formed it in to small nuggets. Keep them on the small side because they will expand on cooking. I put them on an oiled baking tray and covered them with tin foil and baked for 20 – 30 mins at 180oC. Keep an eye on them, they are only small so it won’t take much to burn them. My thinking with this was that it keep them dry and therefore make the coating stick better.
- If you have the time, the stock method would work too but you would want to leave them to drain for quite a while and get as much stock out of them as you can before trying to do the coating.
- If you don’t fancy making your own seitan or you have your own preferred product or recipe, you could just use that. If you are still searching for that perfect recipe, give Isa’s recipe a go.
- You will need 2 bowls and a drying rack to complete all of the coating process and to also drain off the seitan once cooked.
- Start off by making the vegan butter milk. Combine the ingredients and then let sit for 5 to 10 mins whilst you get all the ingredients for the flour together and mix them well in a bowl. By the time you have got them all sorted, your buttermilk should be good to go.
- In your second bowl, mix the buttermilk with the hot sauce and salt. You are now ready to being the coating process.
- Add the seitan to the buttermilk and let soak for 10 mins. One soaked, add the pieces a few at a time to the flour and coat well before putting on the drying rack and leaving for another 5 to 10 mins. You can use this time to get your oil heated up. You want it at 180oC. Be careful, don’t burn your house down or anything.
- Once the seitan pieces have sat in the coating for 10 mins, we repeat the coating process. This helps more of the flour stick and also creates all sort of lumps, bumps and crevices which are going to make this really good. Straight in to the buttermilk, straight in to the flour and then in to the 180oC oil.
- The most important tip I found was to leave the pieces along for at least 3 minutes otherwise you risk knocking the coating off. Overall mine took about 8 mins to get nice and golden. My pan was not big enough to cook the whole lot and yours probably won’t be either so I did a couple of batches and kept the first batch warm in a low oven. I chucked the first batch in the oil again for a minute at the end, just because.